• AP 260/11

    94.37 

    For detecting the state (closed/open) of a door or window via the reed contact integrated in the device, with actuation of the reed contact through the supplied magnet for attachment to the moving part of the door or window

  • ERF910

    202.46 

    Wireless RF repeater for extending plant.
    In operation, the ERF910 repeats the RF telegrams from the devices attuned to it.

  • QAC910

    101.83 

    Wireless sensor for acquiring outside temperature and atmospheric pressure.
    In operation, the QAC910 forwards the acquired outside temperature and atmospheric pressure to the central apartment unit QAX9.., either periodically or when changes occur.

  • QFP910

    113.28 

    Wireless sensor for detecting water leaks.
    The QFP910 sends its status (dry / water leak) to the Central Apartment Unit QAX913 periodically or if there is a change in status.

  • WRI982

    107.86 

    The consumption data interface collects consumption (meter) data and communicates these data using KNX RF directly to the central apartment unit (QAX913 or QAX903). Meters may be connected either via Impulse inputs or via M-Bus (wired). There is an additional interface for communication with the Synergyr central communication device, OZW30, for the purpose system migration. 

  • RRV934

    195.23 

    RF-based multicontroller for precontrol of up to 2 room groups or control of ventilation plant with up to 3 stages. All inputs and outputs are also suited for universal use. The relevant data are forwarded wirelessly by the central apartment unit QAX9…

  • RRV918

    150.64 

    RF-based heating circuit controller for up to 8 heating circuits.
    In operation, the RRV918 maintains the required room temperature of the individual heating circuits. The central apartment unit QAX9.. forwards the relevant data via RF.

  • RRV912

    110.27 

    The RRV912 Synco™ living Wireless heating circuit controller for up to 2 heating circuits and DHW heating. In operation, the RRV912 maintains the required room temperature of the individual heating circuits. The central apartment unit QAX9.. forwards the relevant data via RF.

  • SSA955

    86.16 

    The SSA955 Synco™ living Wireless actuator for radiator valves with low power consumption,silent mode (e.g. for use in sleeping rooms). Nominal stroke 2.5 mm, Valve positioning force 110 N,automatic identification of valve stroke. Integrated room temperature sensor.

  • QAA910

    58.57 

    The QAA910 Synco™ living Wireless room temperature sensor for acquiring the room temperature and forwards the acquired room temperature to the central apartment unit QAX9.., either periodically or in the case of changes.

  • QAW910

    141.60 

    The QAW910 Synco™ living Wireless room unit is used for the operation and display of basic space heating functions. It also forwards the acquired room temperature to the central apartment unit QAX9.., either periodically or when changes occur. The room temperature is shown on the display of the QAW910.

  • OZW772.250

    939.98 

    Web server OZW772.250 for 250 Synco KNX devices, allows for remote plant control and monitoring via the web. Operate web browser via PC/laptop and Smartphone. Operate ACS (PC/laptop with ACS plant operating software). Connections: USB and Ethernet.

  • OZW772.16

    704.98 

    Web server OZW772.16 for 16 Synco KNX devices, allows for remote plant control and monitoring via the web. Operate web browser via PC/laptop and Smartphone. Operate ACS (PC/laptop with ACS plant operating software). Connections: USB and Ethernet.

  • OZW772.04

    469.99 

    Web server OZW772.04 for four Synco KNX devices, allows for remote plant control and monitoring via the web. Operate web browser via PC/laptop and Smartphone. Operate ACS (PC/laptop with ACS plant operating software). Connections: USB and Ethernet.

  • OZW772.01

    234.99 

    Web server OZW772.01 for one Synco KNX device, allows for remote plant control and monitoring via the web. Operate web browser via PC/laptop and Smartphone. Operate ACS (PC/laptop with ACS plant operating software). Connections: USB and Ethernet.

  • QAX913-9

    404.91 

    The QAX913-9 Synco™ living central apartment unit serves as an operator and display unit for an apartment. It manages individual room control (heating/cooling) of up to 12 rooms, comfort ventilation, precontrol and DHW control, control of air conditioning equipment, and acquires the consumption data of heat, water, electricity and gas. Additional functions include the control of lights and blinds. Door and window contacts plus smoke detectors and water monitors can be integrated for monitoring purposes.